Location:
Search - jtag source
Search list
Description: 在ICCAVR环境下建立项目，并加入源文件，然后编译、连接该项目
用AVR Studio仿真（需选择JTAG ICE）或者将SKEY.HEX烧入单片机-ICCAVR environment in the establishment of the project, and add source file, then compile and link the project with the AVR Studio emulation (must be selected JTAG ICE) or burned into the microcontroller will SKEY.HEX
Platform: |
Size: 106496 |
Author: pipi |
Hits:
Description: c8051f020通过Jtag接口读写Flash存储器C语言源程序-c8051f020 Flash memory read and write through the Jtag interface, C language source
Platform: |
Size: 4096 |
Author: mjh |
Hits:
Description: ARM的JTAG调试原理 含Openjtag和GIVEIO的程序源码 可用于自制wiggler 和参考PC机外设编程接口-JTAG debugging with ARM-principle procedures Openjtag and GIVEIO wiggler source and reference for self-programming interface PC Peripherals
Platform: |
Size: 1149952 |
Author: YSS |
Hits:
Description: 实验名称：系统复位源简单实验
功能描述：使能看门狗，用LED显示复位源。
实验目的：熟悉系统复位源
学习看门狗的使用
实验说明：MCU--M128
内部8M晶振
LED8：上电复位
LED7：外部复位
LED6：掉电复位
LED5：看门狗复位
LED4：JTAG复位
连接方式：插上LEDEN（JMP15）的跳线帽。-Experiment name: System reset function of the source described a simple experiment: enable watchdog, with LED display reset source. Purpose: to learn the source familiar with the system reset watchdog experiments show that the use of: MCU- M128 Internal 8M crystal LED8: Power-on reset LED7: external reset LED6: brownout reset LED5: Watchdog reset LED4: JTAG Reset connection : Plug LEDEN (JMP15) jumper cap.
Platform: |
Size: 15360 |
Author: octopuszy |
Hits:
Description: 晓舟通用在线调试系统(MornShip Universal Online Debug System，简称MSUODS)是晓舟工作室研发的具有完全自主知识产权的通用型嵌入式实时在线调试系统。MSUODS针对所有采用8051(兼容)指令的芯片，利用串口通讯实现了通行在线调试仿真系统(ICE/JTAG)的所有在线调试仿真功能，具有性价比高，资源消耗少，不受芯片型号限制的通用性，支持多种类型和数量不受限制的断点设置，基于多种集成开发环境(IDE)的源码级在线调试，支持二次开发等众多特点-MornShip Universal Online Debug System (MSUODS), for all 8051 (compatible) instructions MCU/DSP/SoC chip, via the UART interrupt communication, implement all function of the general online debug & simulator system. The feature of MSUODS include high performance/price ratio, less resources consumption, universal to all type of chip, support multi-type and no-limited breakpoints, source code level online debug base on multi Integrated Development Environment(IDE), support secondary development and so on
Platform: |
Size: 530432 |
Author: xuezhen |
Hits:
Description: 摘要：在以Openocd为调试代理的基础上·研究一种嵌入式源码级编译调试开发平台，并在多目标机上实现；该开发平台以Eclipse
为调试前端。实现了与通用远程调试器GDB的无缝集成，并以Openoed作为调试代理，可以通过JTAG接口实现对目标机上目标程序的
源代码调试l阐述了基于Openoed的嵌入式软件源码级交叉调试技术，讨论了宿主机／目标机开发模式中源码级调试的原理和方法。-Abstract: In the Openocd the basis for the commissioning agent of compiling a source-level debugging of embedded development platform, and multi-target to achieve the development platform to Eclipse front-end for debugging. Achieve universal remote debugger GDB and seamless integration, and as a commissioning agent Openoed, through JTAG interface target program on the target machine' s source code debugging l described Openoed embedded software based on source-level cross debugging technologies and discuss the host/target development mode source-level debugging of principles and methods.
Platform: |
Size: 333824 |
Author: 李立 |
Hits:
Description: wrtjp source linksys jtag fimrware upoader
Platform: |
Size: 336896 |
Author: data |
Hits:
Description: S3C2443 SJF(FOR JTAG DEBUG) Source Code
Platform: |
Size: 7235584 |
Author: Anson |
Hits:
Description: 1. 本实例控制开发板上面的LCD的显示；
2. 工程在\project文件夹里面
3. 源文件和管脚分配在\rtl文件夹里面
4. 下载文件在\download文件夹里面,.mcs为PROM模式下载文件,.bit为JTAG调试下载文件-1 The examples above control development board LCD display 2 works in \ project folder inside 3 source file and the pin assignment in \ rtl folder inside 4 download the file in the \ download folder inside. mcs file for the PROM mode, download,. bit in the JTAG debug download
Platform: |
Size: 304128 |
Author: myname |
Hits:
Description: 修改自OpenCores的黑白棋游戏代码。采用VGA输出显示，PS2键盘（W、A、S、D、回车）输入控制，实现AI，LED灯指示是否游戏结束，VGA显示频率25MHz，系统频率50MHz，经过Cyclone IV芯片EP4CE115F29C7N的板级调试，实现全部功能，文件夹下有rtl源代码，管脚定义pin文件，和可以直接进行JTAG烧写和E2PROM烧写的pof和sof文件，-Modified from OpenCores Othello game code. Using the VGA output display, PS2 keyboard (W, A, S, D, Enter) input control to achieve AI, LED lights indicate whether the game is over, VGA display frequency of 25MHz, the system frequency of 50MHz, after Cyclone IV chip, board-level debugging EP4CE115F29C7N to achieve full functionality, folder there rtl source code, pin definition of pin file, and can be programmed and the JTAG programming of pof and E2PROM sof file,
Platform: |
Size: 252928 |
Author: 诗律 |
Hits:
Description: 压缩包是使用JLink间接烧写s3c6410 nand_flash的源代码及可执行文件。由于s3c6410不像s3c2410那样有nor flash，可以方便的使用JTAG接口烧写引导程序。压缩包内的代码可以根据http://hi.baidu.com/__eabi/blog/item/5bfceaadf90eb39146106426.html帖子的说明，借助ADS1.2开发环境和JLINK，烧写二进制程序到开发板。
文件说明：
sdram_init_s3c6410
|
、——sdram_init_Data（目录）
|
、——sdram_init.bin（直接烧写的二进制）
|
、——sdram_init.inc（源代码头文件）
|
、——sdram_init.S（汇编代码）
|
、——sdram_init.mcp（ADS1.2的工程文件）-you can use the source code to downloads binary file on s3c6410 platform.
how to use the source code:
http://hi.baidu.com/__eabi/blog/item/5bfceaadf90eb39146106426.html
Directory structure:
sdram_init_s3c6410
|
、——sdram_init_Data（directory）
|
、——sdram_init.bin（binary file）
|
、——sdram_init.inc（header file）
|
、——sdram_init.S（assembler code）
|
、——sdram_init.mcp（project file
for ADS1.2）
Platform: |
Size: 33792 |
Author: phantasy |
Hits:
Description: LED灯实验。1．在ICCAVR环境下建立项目，并加入源文件，然后编译、连接该项目
2．用AVR Studio仿真（需选择JTAG ICE仿真）或者将LED.HEX烧入单片机
3．程序默认的是流水灯，当把源程序的i=0改为i=1时，LED将以闪烁灯显示-LED light experiment.A. , Establish project ICCAVR environment, and adding a source file and then compile the project, connecting
Two. Simulation using the AVR Studio (JTAG ICE emulation must be selected) or the LED.HEX burned into the microcontroller
3. The default is water lights, when the source of i = 0 to i = 1, the LED will be flashing lights
Platform: |
Size: 20480 |
Author: 赖激烈 |
Hits:
Description: 数码管实验 。1．在ICCAVR环境下建立项目，并加入源文件，然后编译、连接该项目
2．用AVR Studio仿真（需选择JTAG ICE）或者将LED.HEX烧入单片机
3．可以看到6位数码管循环显示1、2、3、4、5、6，可以更改data[6]数组的内容
来改变循环显示的内容。-Digital control experiment.A. , Establish project ICCAVR environment, and adding a source file and then compile the project, connecting
Two. AVR Studio simulation (need to select the JTAG ICE), or the LED.HEX burned into the microcontroller
3. Can see that 6 of the digital control loop to display 1, 2, 3, 4, 5, 6, can change the contents of the data [6] array
To change the contents of the cycle.
Platform: |
Size: 21504 |
Author: 赖激烈 |
Hits:
Description: 利用FPGA控制VGA输出在CRT显示器上实现乒乓球游戏，工程在\project文件夹里面 源文件和管脚分配在\rtl文件夹里面 下载文件在\download文件夹里面,.mcs为PROM模式下载文件,.bit为JTAG调试下载文件。在xilinx xc3s400调试通过-The FPGA to control the VGA output table tennis game on a CRT monitor, the project \ project file folder source files and pin assignment in \ rtl folder inside the folder download \ download file. Mcs, PROM mode downloaddownload the file, bit JTAG debug. Xilinx xc3s400 debugging through
Platform: |
Size: 1021952 |
Author: rooney |
Hits:
Description: 本次程序通过开发板上面的4个按键控制8个LED。
一个是自己定义的控制方式,一个是符合38译码器的逻辑功能。
目录说明:
工程在\project文件夹里面
源文件和管脚分配在\rtl文件夹里面
下载文件在\download文件夹里面,.mcs为PROM模式下载文件,.bit为JTAG调试下载文件。-This program through the development board above four buttons control eight LEDs. Own definition of control, is in line with the 38 decoder logic functions. Directory Description: The project \ project file folder source files and pin assignment in \ rtl folder inside download \ download file folder, the download of mcs, PROM mode bit in the JTAG debug download.
Platform: |
Size: 528384 |
Author: 赵姣姣 |
Hits:
Description: 源码（基于ARM9S3C2440））使用JTAG调试FLASH的工具源码
-Source (based ARM9S3C2440)) using the JTAG debug tool source code in the FLASH
Platform: |
Size: 367616 |
Author: 模仿 |
Hits:
Description: 本源程序是关于TI DSP2804芯片的串行编程工具源文件，用于直接通过串口对DSP编程，而不用经过JTAG工具-The source code is on the TI DSP2804 chip serial programming tool source file for the DSP programming directly through the serial port, without going through the JTAG tools
Platform: |
Size: 31744 |
Author: James |
Hits:
Description: 本源程序是关于TI DSP2808芯片的串行编程工具源文件，用于直接通过串口对DSP编程，而不用经过JTAG工具。编译器用CCStudio-The source code is on the TI DSP2808 chip serial programming tool source file for the DSP programming directly through the serial port, instead of through the JTAG tool. Compiler uses CCStudio
Platform: |
Size: 31744 |
Author: James |
Hits:
Description: 本源程序是关于TI DSP2812芯片的串行编程工具源文件，用于直接通过串口对DSP编程，而不用经过JTAG工具.编译器用CCStudio-The source TI DSP2812 chip serial programming tool source file for DSP programming directly through the serial port, without going through the JTAG tools used by the compiler CCStudio
Platform: |
Size: 31744 |
Author: James |
Hits:
Description: 本源程序是关于TI DSP2833芯片的串行编程工具源文件，用于直接通过串口对DSP编程，而不用经过JTAG工具.编译器用CCStudio-The source TI DSP2833 chip serial programming tool source file for DSP programming directly through the serial port, without going through the JTAG tools used by the compiler CCStudio
Platform: |
Size: 37888 |
Author: James |
Hits:
«
1
2
...
4
5
6
7
8
910
»